General Control; Volume Control - Sharp HT-CN410DVH Operation Manual

General control

HT-CN410DVH
ENGLISH
E-24

Volume control

Press the VOLUME + button to increase the
volume and the VOLUME − button for decreasing.
Treble and Bass
1 Press the MODE button repeatedly to select the
TREB or BASS.
2 Within 3 seconds, press the VOLUME + or
VOLUME − button to adjust the level.
You can adjust the level at 2 dB intervals.
Muting
The volume is muted temporarily when pressing
the MUTE button on the remote control.
Press again to restore the volume.
Headphones
When headphones are plugged in, the sys-
tem will enter the stereo mode automatical-
ly.
When headphones are unplugged, the sys-
tem will return to the previous status.
Before plugging in or unplugging the headphones, reduce the volume.
Be sure your headphones have a 3.5mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOL buttons.
You cannot use the surround feature with headphones.
Do not plug in/out headphones when recording on other equipment. Sound may
skip.
03/10/29 HTCN410DVH 8_E2.fm
R
DIGITAL KHz
Pro Logic
MHz
STEREO V CD MP3
S
.....
MIN 1 2 38 39 MAX
TITLE TRK PRESET CHP PROG SLEEP DB REPEAT 1 A - B
DIGITAL KHz
Pro Logic
MHz
STEREO V CD MP3
−10 dB to +10 dB
TITLE TRK PRESET CHP PROG SLEEP REPEAT 1 A - B
DB
DIGITAL KHz
Pro Logic
MHz
STEREO V CD MP3
−10 dB to +10 dB
TITLE TRK PRESET CHP PROG SLEEP REPEAT 1 A - B
DIGITAL KHz
Pro Logic
MHz
STEREO V CD MP3
TITLE TRK PRESET CHP PROG SLEEP REPEAT 1 A - B
DIGITAL KHz
Pro Logic
MHz
STEREO V CD MP3
L R P H O N E O N
STEREO
L R
1 2 0 : 2 5 : 5 0
C
S
LS RS
TITLE CHP