Test Tone - Sharp HT-CN410DVH Operation Manual

Adjusting speaker delay time/speaker level (continued)
HT-CN410DVH
ENGLISH

Test tone

You can check the sound output from the speakers.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button to select DVD mode.
3
Press the SETUP button.
4
Press the 8 or 9 button to select
"SPEAKER SETUP" and then
press the ENTER button.
5
Press the or button to select
8 9
"TEST TONE".
6
Press the button and use the
-
or button to select "ON".
9
7
Press the ENTER button.
Speakers emit the test tone for 2 seconds in turn, starting with the front speaker
(left).
Front speaker (left)
Subwoofer
Surround speaker (right)
8
To end the test tone, press the SETUP button.
Note:
When the listening mode is "STEREO", only the front speakers can be checked.
E-48
8
Centre speaker Front speaker (right)
Surround speaker (left)
Speaker level setting
If sounds from the speakers are uneven, you can equalise them by adjusting the
speaker levels.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button to select DVD mode.
3
Press the MODE button repeatedly to select the desired speaker.
4
Within 3 seconds, press the VOLUME +,
or VOLUME − button to adjust the level.
You can adjust the level at 1 dB intervals.
To adjust the levels of other speakers, repeat the operation from step 3.
Speaker type
FRONT LEFT Front speaker (Left)
CENTER Centre speaker
FRONT RIGHT Front speaker (Right)
REAR LEFT Surround speaker (Left)
REAR RIGHT Surround speaker (Right)
SUBWOOFER Subwoofer
Notes:
The speaker type appears followed by "TREBLE", "BASS" and "MASTER
VOLUME".
For details on "TREBLE" and "BASS", see page 24.
The volume can still be adjusted even after "MASTER VOLUME" disappears.
When the listening mode is "STEREO", you can change the level of the front
speakers and the subwoofer.
If subwoofer sound is distorted, lower the subwoofer level.
03/10/29 HTCN410DVH 8_E2.fm
CNT 3DB
Level range Default
setting
- 10 DB to + 10 DB 0 DB
- 10 DB to + 10 DB 0 DB
- 10 DB to + 10 DB 0 DB
- 10 DB to + 10 DB 0 DB
- 10 DB to + 10 DB 0 DB
- 10 DB to + 10 DB 0 DB