Installing And Dismantling The Appliance - Siemens HSL6EI23 Installation Instructions & Instructions For Use

Installing and dismantling the
appliance
Installing the appliance
Dismantling the appliance
Install the appliance as follows:
• Fully insert the appliance and centre it. Ensure
that no power cables or connecting cables are
kinked, trapped or running over sharp edges.
• Adjust the appliance so that it is horizontal,
bearing in mind that there must a gap of 15 mm
above the appliance.
• Screw the appliance to the cupboard with the
4 securing screws.
Dismantle the appliance as follows:
• Disconnect the appliance from the power supply.
Switch off the gas supply.
• Undo the securing screws, lift the appliance
slightly and pull it out.
• If necessary, disconnect the electric and gas
connections in accordance with regulations.
13