Table of Contents
Advertisement
Appendix
The other party cannot hear you.
You have pressed the
set is "muted".
¥
Switch on the microphone again (page 12).
The incoming call number is not displayed
although CLIP is set.
Phone number identification is not enabled.
¥
Caller should ask network provider to acti-
vate phone number identification (CLI).
You hear an error tone when keying an input
(a descending sequence of tones).
Action has failed/invalid input.
¥
Repeat the operation.
Watch the display and refer to the operating
instructions if necessary.
You cannot listen to messages on the net-
work mailbox.
Your phone system is set for pulse dialling.
¥
Set your phone system to tone dialling.
The calls list does not indicate a time for a
message.
Date/time are not set.
¥
Set the date/time (page 8).
The answering machine reports "PIN is incor-
rect" during remote operation.
1. System PIN entered is incorrect
¥
Repeat input of system PIN,
2. System PIN is still set to 0000.
¥
Change system PIN to a number other
than 0000 (page 39).
The answering machine does not record any
messages/has switched over to 'announce
only'.
Its memory is full.
¥
Delete old messages.
¥
Play back new messages and delete.
42
u
(INT) key. The hand-
Customer service & product
warranty – Australia and New
Zealand
Gigaset Communications provides you
with product information that can be
accessed from the Customer Care section
of our website.
www.gigaset.com/au
It provides you with 24/7 support for all
our products. It also provides a list of FAQs
and answers plus user guides and current
software updates (if available for the prod-
uct) for you to download.
You will also find frequently asked ques-
tions and answers in the appendix of this
user guide.
Gigaset Cordless telephones come with a
2 Year limited warranty that covers faults
with the manufacturing process or com-
ponents.
Gigaset Communications will at its discre-
tion, repair or replace, any product sup-
plied that is found to have a manufactu-
ring defect.
Please retain your proof of purchase
details for warranty purposes.
IMPORTANT
Please retain your sales receipt as proof of
the date of purchase.
Customer Service
If you require assistance in operating this
product please contact us
AUS: 1300 780 878or by e-mail at
gigasetsupport@ingrammicro.com.au
NZ: 0800 780 878
If you are trying to access a Network Ser-
vice and require assistance specifically
related to the network service or would
like to subscribe to the service, contact
your service provider.
Advertisement
Table of Contents
