No Signal Off; No Operation Off; Setup - Sharp AQUOS LC-37HV4E Operation Manual

Basic adjustment settings

No signal off

When set to "Enable", the power will automatically shut
down if no signal inputs for 15 minutes.
1
Press MENU and the TV MENU screen
displays.
2
Press c/d to select "Power control".
• Power control menu displays.
3
Press a/b to select "No Signal Off", and
then press ENTER.
TV MENU
Power control
Power Save
No Signal Off

No Operation Off

4
Press c/d to select "Enable", and then
press ENTER.
TV MENU
Power control
No Signal Off
Enable
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
• When a TV programme finishes, and the AVC System
receives signal input, this function may not operate.
38

Setup

[Manual]
[Disable]
[Disable]
Disable
No operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
1
Press MENU and the TV MENU screen
displays.
2
Press c/d to select "Power control".
• Power control menu displays.
3
Press a/b to select "No Operation Off", and
then press ENTER.
TV MENU
Power control
Power Save
No Signal Off
No Operation Off
4
Press c/d to select "Enable", and then
press ENTER.
TV MENU
Power control
No Operation Off
Enable
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
Setup
[Manual]
[Disable]
[Disable]
Disable