Turning On The Power; Turning Off The Power - Sharp AQUOS LC-37HV4E Operation Manual

Watching TV
Display
STANDBY/ON button
STANDBY/ON indicator
AVC System
STANDBY/ON indicator
POWER
Display status indicator
Off Power off
Flashing red AVC System does not turn on or its AC cord is disconnected.
Red The System is in standby mode.
Green The System is on.
AVC System status indicator
Power off
Off
Only the AVC System is in standby mode or the System is in standby mode.
Red
The System is on.
Green

Turning on the power

MAIN POWER
When turning the AVC System on first
• The initial auto installation starts when the System powers on for the first
time. If the System has been turned on before, the initial auto installation
will not be invoked. See page 23 to try auto installation from the Setup
menu.

Turning off the power

• If you are not going to use this System for a long period of time, be sure to
remove the AC cords from the power outlet.
• Weak electric power is still consumed even when both MAIN POWER and
POWER are turned off.
• When the STANDBY/ON indicator lights up red, it takes about 10 to 15
seconds for the indicator to turn off if POWER on the AVC System is turned
"Off" or the AC cord is unplugged from the AC outlet.
1
Press MAIN POWER on the Display.
• The STANDBY/ON indicator on the Display flashes red.
2
Press POWER on the AVC System.
• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up
green and the one on the AVC System lights up green.
• If the STANDBY/ON indicators still light up red, press
B on the remote control unit or STANDBY/ON button
on the Display to turn the System on.
1
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System lights
up red.
2
Press MAIN POWER on the Display.
• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up
green and the one on the AVC System lights up green.
• If the STANDBY/ON indicators still light up red, press
B on the remote control unit or STANDBY/ON button
on the Display to turn the System on.
NOTE
Press B on the remote control unit or STANDBY/
1
ON button on the Display.
• The System enters standby mode and the image on the
screen disappears.
• Both STANDBY/ON indicators change from green to red.
2
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System turns
off and the one on the Display flashes red.
3
Press MAIN POWER on the Display.
• The STANDBY/ON indicator on the Display gradually
turns off.
NOTE
15