Part names
AVC System
Front view
PC INPUT terminal (AUDIO)
STANDBY/ON indicator
POWER button
* If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this
case, press CLEAR, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object.
This will reset the System as shown below.
• AV MODE resets to USER.
• TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• SRS resets to OFF.
• Image position is initialised.
NOTE
• Pressing CLEAR will not work if the System is in standby mode (indicator lights red).
• Pressing CLEAR will not delete channel preset or password. See page 61 for clearing the password when you know it.
See page 75 for initialising to the factory preset values when you forget your password.
Rear view
INPUT 3 terminals (Y, P
ANTENNA INPUT terminal
AV OUTPUT terminal
(S-VIDEO)
AV OUTPUT terminal
(VIDEO)
12
INPUT 4 terminal (VIDEO)
PC INPUT terminal
(ANALOG RGB)
INPUT 4 terminal (S-VIDEO)
CLEAR*
(C
)
P
(C
B
B
,
R
R
INPUT 3 terminal (SCART)
AV OUTPUT terminals
(AUDIO)
INPUT 2 terminal (SCART)
INPUT 4 terminals (AUDIO)
))
RS-232C terminal
INPUT 1 terminal
(SCART)
DC OUTPUT terminal
(Terminal for expanded
functionality in the near
future.)
Headphone
(When connecting headphones,
the sound from the speakers is
muted.)
(How to open the door)
DISPLAY OUTPUT1 terminal
DISPLAY OUTPUT2
terminal
AC INPUT terminal