Sharp R-555 Operation Manual With Cookbook page 22

900 w
Table of Contents

Advertisement

4. DELAY START:
DELAY START enables you to programme the
oven to cook at any time during the:
• next 12 hours (if the 12 hour clock is set).
• next 24 hours (if the 24 hour clock is set).
Example:
The current time of day is 1:00pm and you want to programme the oven to reheat a casserole on 50P
for 40 minutes at 4:30pm. (In this example the oven is set to the 12 hour clock mode).
1. Enter the desired start
time by pressing the
TIME keys.
x4
4. Input the power
level by pressing the
MICROWAVE
POWER LEVEL
key 3 times.
x3
NOTES:
• The DELAY START time can only be entered
in multiples of 10 minutes. It is not possible to
enter less than 10 minutes or any time which
is not in multiples of 10 minutes.
• Once the oven is programmed for DELAY
START the display will flash between the time
of day and
• If you want to cancel a DELAY START
programme, press the STOP/CLEAR key.
• If the door is opened after programming, close
the door and press the START/AUTO
MINUTE key to continue with DELAY START.
CONVENIENT FUNCTIONS
2. Press the DELAY START/
CLOCK SET key once to
set the start time for cooking.
x3
5. Press the START/AUTO
.
• You can only use DELAY START with manual
cooking.
• Before programming the oven, always check
the display is showing the correct time of day.
x1
MINUTE key once to
start the programme.
x1
• If you press and hold the DELAY START/
CLOCK SET key, the DELAY START time
will be displayed until you release your finger
from the key.
IMPORTANT:
It is recommended the oven is always
attended when in use. Check to ensure
you have programmed the oven correctly.
Exceeding cooking times and use of
excessive power levels can lead to food
overheating and cause a risk of fire.
20
3. Enter the desired
cooking time by pressing
the 10 MIN. key 4 times.
When the oven
starts at 4:30pm,
the preprogrammed
sequence will start.
The cooking time
and mode will
appear on the
display.
x4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents