Table of Contents
Advertisement
ASSEmblY
blower
The blower slides into the channel bracket on the rear
of the stove as shown at right. Plug the blower into a
properly grounded receptacle.
Shaker handle
The shaker handle installs onto the shaker handle
mount using the two hex-bolts and washers provided.
Firebricks
The SF250 uses 14 "standard" firebricks, as shown
below. These standard firebricks measure 9" X 4½"
X 1¼" each. The firebricks are already installed in
the stove but can be removed to lighten the stove for
moving. The doors can also be removed by simply lift-
ing them off of the hinges.
Firebrick Diagram
4
Advertisement
Table of Contents
