Before Operating; Getting Started; Clock Setting; Stop/Clear - Sharp R-390H Operation Manual

A?????, SMEF R390H(S) O/M

BEFORE OPERATING

Getting Started

Step
Ensure the oven door is closed.
Plug the oven into a power point .
1
Press the STOP/CLEAR pad so that the
oven beeps.
2

Clock Setting

* To enter the present time of day 11:34 (AM or PM).
Step
Press the TIMER/CLOCK pad.
1
Enter the correct time of day by pressing
the numbers in sequence.
2
Press the TIMER/CLOCK pad again.
3
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45),
display. Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).
The clock of the oven works based on the frequency of power source. So it may gain or lose in some area
where the frequency varies. It is recommended that you should adjust the time occasionally.
If you wish to know the time of day during the cooking or timer mode, press the TIMER/CLOCK pad. As long
as your finger is pressing the TIMER/CLOCK pad, the time of day will be displayed.

Stop/Clear

Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.
SMEF R390H(S) O/M,EN,P05-10
Procedure
Procedure
7
Pad Order
Flashing eights
STOP
CLEAR
Only the dots will remain.
Pad Order
TIMER
CLOCK
The dots (:) will flash on and
off.
TIMER
CLOCK
E-7
02.12.5, 10:14 AM
Display
Display
will appear in the