Sharp XL-MP45H Operation Manual page 18

Listening to a CD or MP3 disc (continued)
XL-MP45H
ENGLISH
To interrupt playback:
Main unit operation:
Press the button.
To resume playback from the same point, press the
again.
Remote control operation:
Press the button.
To resume playback from the same point, press the
To stop playback:
Press the button.
To remove the disc:
Whilst in the stop mode, press the
Caution:
! If a disc is damaged, dirty, or loaded upside down, "NO DISC" or
"READ ERR" will appear on the display.
! Keep foreign objects out of the disc compartment.
! Subjecting the unit to shock or vibration may cause mistracking.
! When the unit is not being used, be sure to close the disc com-
partment. If it is left open, the lens may be covered with dust and
the unit may not operate properly.
! If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
" Headphones
! Before plugging in or unplugging the head-
phones, reduce the volume.
! Be sure your headphones have a 3.5 mm (1/
8") diameter plug and are between 16 ohms
and 50 ohms impedance. The recommended
impedance is 32 ohms.
! Plugging in the headphones disconnects the
speakers automatically. Adjust the volume
using the VOLUME control.
E-11
" To change the display (MP3 discs only)
Whilst in the stop mode or playback mode, press the MP3 DISPLAY
button.
button
Each time the button is pressed, the display will change as follows.
[When in the stop mode]
button.
Total number of tracks
CD EJECT button.
[When in the playback mode]
Track number Elapsed playback
03/8/20
Folder name
Track name
Folder name
time
Track name
XL-MP45H(H)E2.fm
TINSZ0227SJZZ