Enhancing Your System - Sharp XL-MP45H Operation Manual

Timer and sleep operation (continued)
XL-MP45H
ENGLISH
! To use timer and sleep operation together
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
1
Set the sleep time (steps 1 - 3, page 26).
2
Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, pages 25 - 26).
Sleep timer setting Timer playback setting
5 minutes - 3 hours
Sleep operation will
automatically stop.
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
E-27

Enhancing your system

The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
! Listening to the playback sounds from VCR,
DVD, etc.
1 Use a connection lead to connect the VCR, DVD, etc. to the VID-
Timer playback
EO/AUX IN sockets.
start time
When using video equipment, connect the audio output to this
unit and the video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX
button.
4 Play the connected equipment.
Note:
To prevent noise interference, place the unit away from the televi-
sion.
! To record on a tape
1 Load a cassette into the cassette compartment with the side to
be recorded on facing you.
2 Press the VIDEO/AUX button.
3 Press the
4 Press the
5 Play the VCR, DVD, etc.
03/8/20
White
Red
White
VCR, DVD, etc.
RCA lead
Red
(not supplied)
To the line output sockets
button.
( ) button.
XL-MP45H(H)E3.fm
TINSZ0227SJZZ