Listening To The Radio; 12 6. Tuner (Band) Button; Fm Stereo Mode Indicator; Fm Stereo Receiving Indicator - Sharp XL-MP333H Operation Manual

Listening to the radio

XL-MP333H
XL-MP444H
ENGLISH
E-21
" Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING (
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
! When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
! Auto scan tuning will skip weak signal stations.
! To stop the auto tuning, press the TUNING button again.
! When an RDS (Radio Data System) station is tuned in, the fre-
quency will be displayed first, and then the RDS indicator will
light. Finally, the station name will appear.
! Full auto tuning can be achieved for RDS stations "ASPM", see
page 24.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
! " " will appear when an FM broadcast is in stereo.
! If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monau-
ral, and the sound becomes clearer.
04/5/26 XL-MP333H_MP444H_E.fm
or ) button to tune in to the desired

FM stereo mode indicator

FM stereo receiving indicator

TINSZA022SJZZ