Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
Power source
AC 230 V, 50 Hz
Power
Power on:100 W
consumption
Power stand-by: 0.6 W(*)
Dimensions
Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 307 mm (12")
Weight
6.1 kg (13.4 lbs.)
( * )This power consumption value is obtained when the demonstra-
tion mode is cancelled in the power stand-by mode. Refer to
page 9 to cancel the demonstration mode.
Amplifier
Output power
PMPO: 752 W (total)
MPO: 376 W (188 W + 188 W) (DIN 45 324)
RMS: 200 W (100 W + 100 W) (DIN 45 324)
RMS: 160 W (80 W + 80 W) (DIN 45 500)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Input terminals
Video/Auxiliary (audio signal):
500 mV/47 k ohms
USB input: USB type
CD player
Type
5-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
D/A converter
1-bit D/A converter
Frequency
20 - 20,000 Hz
response
Dynamic range
90 dB (1 kHz)
Tuner
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Cassette deck
Frequency
50 - 14,000 Hz (normal tape)
response
Signal/noise ratio
50 dB (recording/playback)
Wow and flutter
0.35 % (DIN 45 511)
Speaker
Type
2-way type speaker system
5 cm (2") tweeter
13 cm (5-1/8") woofer
Maximum input
200 W
power
Rated input power
100 W
Impedance
6 ohms
Dimensions
Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 260 mm (10-1/4")
Weight
3.1 kg (6.8 lbs.)/each
XL-MP150H
ENGLISH
8
E-48