General Control - Sharp XL-MP150H Operation Manual

General control

XL-MP150H
ENGLISH
/
/
ASPM
PTY.TI
SEARCH
DISPLAY
MODE
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Illumination light control
When the power is turned on, light illuminates around the display.
To turn on/off the light, hold down the CLEAR/DIMMER button on
the remote control for 2 seconds or more.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
E-11
Volume control
Main unit operation:
When the VOL + / - control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
Surround mode
When the X-BASS (SURROUND)/DEMO [X-BASS (SURROUND)]
button is pressed, the unit will enter the surround mode and adjust
low bass and high frequency automatically according to volume
input. To cancel this mode, press the X-BASS (SURROUND)/
DEMO [X-BASS (SURROUND)] button again.
Equaliser
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
FLAT The sound is not modified.
ROCK For rock music.
CLASSIC For classical music.
POPS For pop music.
VOCAL Vocals are enhanced.
JAZZ For jazz.
Note:
If the EQUALIZER (EQUALIZER MODE) button is pressed in the
surround mode, it will be cancelled automatically.
0 .....
30 MAXIMUM