Tape Recording; Listening To Sound From A Usb-Connected Pc - Sharp XL-MP150H Operation Manual

Listening to sound from a USB-connected PC (continued)
XL-MP150H
ENGLISH
Useful function with Windows Media Player or
iTunes player
You can use the following buttons on the unit or remote control to op-
erate the Windows Media Player or iTunes player.
OS Application
Windows 98 Windows Media
SE/2000/ Player 9 Series
ME/XP
Windows iTunes
2000/XP only
(Mac OS X)
Preparation:
It is necessary to set an application type in order to make above but-
tons effective.
Press ENTER button on the remote control repeatly until the desired
application appears.
"WMP"
(Windows Media Player) (iTunes for Windows)
E-39
Button Operation
Playback/ Pause
Stop
Next
Previous
Playback/ Pause
Next
Previous
"ITUNES W" "ITUNES M"
(iTunes for Mac)
Notes:
Make sure Windows Media Player or iTunes player in active
mode.
Do not press buttons on the left table when opening other
application. It may cause unexpected operation on the PC.
It is recommended not to open other application on the PC whilst
using above function.
Make sure to select a same application type with the PC.
To record on a tape
1 Insert a cassette in the cassette compartment.
2 Press the VIDEO/AUX/USB button repeatly to select "USB"
3 Press the button.
4 Press the / (TAPE ) or (TAPE
Recording will start syncronously if you press the
whilst opening Windows Media Player or iTunes player.
5 Play back on the PC.
To stop a recording
1 Press the (TAPE ) button.
Recording will stop syncronously if you press the
opening Windows Media Player or iTunes player.
Note:
Recording will not stop even PC had stopped playing the audio
data. Make sure to press the button when finish a recording.
) button.
/ button
button whilst