Enhancing Your System - Sharp XL-MP150H Operation Manual

Enhancing your system

The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
White
ANTENNA AM
LOOP
FM
75 OHMS
VIDEO/AUX
IN
RIGHT LEFT
Red White
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
SUBWOOFER
RIGHT LEFT
PRE-OUT
Auto power on function:
When you press any of the following buttons, the unit turns on.
VIDEO/AUX button (main unit and remote control): The unit turns
on and the "VIDEO" function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TAPE, TUNER, VIDEO/AUX).
Listening to the playback sounds from VCR,
DVD, etc.
VCR, DVD, etc.
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
To the line
unit and the video output to a television.
output socket
2
Press the ON/STAND-BY button to turn the power on.
Red
3
Press the VIDEO/AUX button.
4
Play the connected equipment.
Note:
RCA lead
To prevent noise interference, place the unit away from the televi-
(not supplied)
sion.
To record on a tape
1
Insert a cassette in the cassette compartment.
2
Press the VIDEO/AUX button.
/
3
Press the
4
Press the
5
Play the VCR, DVD, etc.
Headphones
Before plugging in or unplugging the headphones, reduce the vol-
ume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended imped-
ance is 32 ohms.
Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
button.
/ (TAPE ) or (TAPE ) button.
XL-MP150H
ENGLISH
8
E-44