10 2. Timer Indicator - Sharp XL-HP535H Operation Manual

Micro component system
Hide thumbs Also See for XL-HP535H:
Table of Contents

Advertisement

4
Within 10 seconds, press the
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET button.
5
Press the
or
button to select "PLAY" or
"REC", and press the MEMORY/SET button.
White
The illustrations show the daily timer setting.
6
Press the
or
button to adjust the hour and
then press the MEMORY/SET button.
The illustrations show the timer playback setting in the daily tim-
er mode.
7
Press the
or
button to adjust the minutes and
then press the MEMORY/SET button.
8
Set the time to finish as in steps 6 and 7 above.
9
or
button to se-
Switch input with the
press the MEMORY/SET button.
To select the timer playback source: CD, TUNER or TAPE.
To select the timer recording source: TUNER.
! When you select the tuner, select a station by pressing the
button.
! If a station has not been programmed, "NO PRESET" will be
displayed and timer setting will be cancelled.
Red
10
Adjust the volume using the VOLUME control, and then
press the MEMORY/SET button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
03/12/16
or
button, and then
or
button, and then press the MEMORY/SET
Continued to the next page
XL-HP535H(H)E4.fm
XL-HP535H
ENGLISH
8
E-36
TINSZA029AWZZ

Advertisement

Table of Contents
loading

Table of Contents