Timer And Sleep Operation; Timer Play Indicator - Sharp XL-UH4H Operation Manual

Timer and sleep operation

Timer playback
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 14).
If it is not set, you cannot use the timer function.
2 For timer playback, load the disc to be played back.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button for about 2 seconds.
3
Within 10 seconds, press the CLOCK/TIMER button.
4
Press the PRESET ( or
the CLOCK/TIMER button.
) button to set hour then press
5
Press the PRESET ( or
press the CLOCK/TIMER button.
6
Switch input with the PRESET (
"OFF TIME" and then press the CLOCK/TIMER button.
7
Press the PRESET ( or
press the CLOCK/TIMER button.
8
Press the PRESET ( or
press the CLOCK/TIMER button.
9
To select the timer playback source, switch input with
PRESET ( or ) button to select "SOURCE" and then
press the CLOCK/TIMER button.
) button to set minute and then
or ) button to select
) button to set hour and then
) button to set minute and then
Continued to the next page
XL-UH4H
35