10 2. Timer Indicator - Sharp XL-HP434H Operation Manual

4
5
6
7
8
Downloaded From Disc-Player.com Sharp Manuals
Within 10 seconds, press the or
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET button.
Press the or button to select "PLAY" or
"REC", and press the MEMORY/SET button.
White
The illustrations show the daily timer setting.
Press the or button to adjust the hour and
then press the MEMORY/SET button.
The illustrations show the timer playback setting in the daily tim-
er mode.
Press the or button to adjust the minutes and
then press the MEMORY/SET button.
Set the time to finish as in steps 6 and 7 above.
9
button to se- Switch input with the
press the MEMORY/SET button.
To select the timer playback source: CD, TUNER or TAPE.
To select the timer recording source: TUNER.
! When you select the tuner, select a station by pressing the
or button, and then press the MEMORY/SET
button.
! If a station has not been programmed, "NO PRESET" will be
displayed and timer setting will be cancelled.
Red
10
Adjust the volume using the VOLUME control, and then
press the MEMORY/SET button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
03/12/2 XL-HP434H(H)E4.fm
XL-HP434H
ENGLISH
or button, and then
Continued to the next page
E-36
TINSZA007AWZZ
8