Recording From The Radio; Erasing Recorded Tapes - Sharp XL-HP535H Operation Manual

Sequential recording from several discs:
1 Perform steps 1 - 6 in "Recording from a CD or MP3 disc" on page
27.
2 Within 5 seconds, press the
or the ( ) button for side B.
23
To perform programmed recording:
1 Programme discs and tracks (see pages 18, 22).
2 Press the button.
3 Press the / ( ) button to record on side A, or the
for side B.
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
Note:
To record on both sides, begin with side A. (If recording is started
from side B, the tape will not switch over to side A.)
Auto restart function:
If the recording side is switched from side A to B during recording,
the system will record the interrupted track on side B from its begin-
ning. The recording will be made without cutting the beginning of the
track on side B.

! Recording from the radio

1
/ ( ) button to record on side A,
2
3
( ) button
4
5
To interrupt recording:
Press the
To resume recording, press the same recording button you pressed
in step 5. Other buttons do not allow resuming.
To stop recording:
Press the
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.

! Erasing recorded tapes

1 Press the TAPE button.
2 Follow steps 2 - 5 in "Recording from the radio".
Tune in to the desired station (see page 23).
Load a cassette into the cassette compartment with side A
facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
Press the button to choose one side or both sides.
... To record on both sides.
... To record on only one
side.
Press the button.
Recording will be paused.
Press the / ( ) button to record on side A, or the
button for side B.
To record on both sides, begin with side A. (If recording is start-
ed from side B, the tape will not switch over to side A.)
button.
(TAPE ) button.
03/12/16 XL-HP535H(H)E3.fm
XL-HP535H
ENGLISH
( )
8
E-28
TINSZA029AWZZ