General Control; On/Stand-By Button; 13. Illumination Light; Volume Control - Sharp XL-HP535H Operation Manual

Micro component system
Hide thumbs Also See for XL-HP535H:
Table of Contents

Advertisement

General control

XL-HP535H
ENGLISH
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
! Illumination light control
When the power is turned on, light illuminates around the volume
control. To turn on/off the light, hold down the CLEAR/DIMMER but-
ton on the remote control for 2 seconds or more.
E-11

! Volume control

Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the vol-
ume.
! Bass control (X-BASS)
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
(X-BASS) button.
! Equaliser
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
FLAT
The sound is not modified.
Bass and treble are emphasised.
ROCK
CLASSIC
Treble is cut a little.
POPS
Bass and treble are slightly emphasised.
VOCAL
Vocals (midrange tones) are emphasised.
Treble is slightly emphasised.
JAZZ
03/12/16
XL-HP535H(H)E2.fm
0 .....
30 MAXIMUM
TINSZA029AWZZ

Advertisement

Table of Contents
loading

Table of Contents