General Control; On/Stand-By Button; 13. Illumination Light; Volume Control - Sharp XL-HP434H Operation Manual

XL-HP434H
ENGLISH
E-11
Downloaded From Disc-Player.com Sharp Manuals

General control

! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
! Illumination light control
When the power is turned on, light illuminates around the volume
control. To turn on/off the light, hold down the CLEAR/DIMMER but-
ton on the remote control for 2 seconds or more.

! Volume control

Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the vol-
ume.
0 .....
! Bass control (X-BASS)
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
(X-BASS) button.
! Equaliser
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
FLAT
The sound is not modified.
ROCK Bass and treble are emphasised.
CLASSIC Treble is cut a little.
POPS Bass and treble are slightly emphasised.
VOCAL Vocals (midrange tones) are emphasised.
JAZZ Treble is slightly emphasised.
03/12/2 XL-HP434H(H)E2.fm
30 MAXIMUM
TINSZA007AWZZ