Technical Specifications - Tannoy VS10 BP Owner's Manual

9.

Technical Specifications

Frequency response (1) +/- 3dB
Recommended Amplifier Power
Power Handling
Sensitivity (1)
2.83 volt @ 1m
Maximum SPL (3)
@ 1m
Impedance
Driver Complement
Recommended Crossover Point
Enclosure
Finish
Connectors
Fittings
Dimensions
Weight
NOTES:
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
200 watt
(1) Average over stated bandwidth. Measured at 1m on axis.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m in half space conditions.
39Hz - 110Hz
35Hz (-10dB)
200 - 400 watt / 8 ohm
Average(2) Programme Peak (10ms)
400 watt 800 watt
95 dB (half space conditions)
Average Peak
118 dB 124 dB
Nominal 8.0 ohm
Minimum 6.0 ohm
1 x 10" (250mm) LF Driver
Type number 2532
80Hz - 110Hz, 24dB/octave
Recommended High-pass filter-35Hz, 24dB/octave
Internal passive crossover @ 110 Hz
50 litre (1.56 cu ft) vented
Textured black paint (optional in white)
2 x Pair 4mm Binding Posts
Input & passive highpass output
2 x Blanking plate allows bass ports to be moved to another facia
8 x M10 flying inserts.
355mm(H) x 365mm(W) x 590mm(D)
14 "(H) x 14.4"(W) x 23.25"(D)
17.5 Kg (38.5 lbs)