Technical Specifications - Tannoy T40 User Manual

10. Technical Specifications

Frequency response (1) +/- 3dB
Recommended Amplifier Power
Power Handling
Sensitivity (1)
2.83 volt @ 1m
Maximum SPL (3)
@ 1m
Impedance
Distortion
0.1 Full Power
50 Hz
100 Hz
0.01 Full Power
50 Hz
100 Hz
Driver Complement
Recommended Crossover Point
Enclosure
Finish
Connectors
Fittings
Dimensions
Weight
NOTES:
Tannoy operate a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
(1) Average over stated bandwidth. Measured at 1m on axis, in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m in half space conditions.
36Hz - 175Hz
300 - 600 watt / 8 ohm
Average(2) Programme Peak (10ms)
300 watt 600 watt
96 dB
99 dB (half space conditions)
Average Peak
124 dB 130 dB
Nominal 8.0 ohm
Minimum 6.7 ohm
2nd Harmonic 3rd Harmonic
0.22% 0.71%
0.56% 0.31%
2nd Harmonic 3rd Harmonic
0.21% 0.31%
0.25% 0.18%
1 x 15" (381mm) LF Driver
Type number 3803
100Hz - 175Hz, 24dB/octave, Linkwitz - Riley
100Hz if used with T12, i12 or i15
100 litre vented, 15mm birch plywood
Textured black\grey paint
2 x Speakon NL4MPR IN/OUT
2 x Recessed carrying handles
1 x 35mm pole mounting socket
4 x Rubber feet
665mm(H) x 440mm(W) x 435mm(D)
26.18ins(H) x 17.32ins(W) x 17.12ins(D)
27 Kg (59.4 lbs)
1200 watt