Technical Specifications - Tannoy VS15 BP User Manual

8.

Technical Specifications

Frequency response (1) +/- 3dB
Recommended Amplifier Power
Power Handling
Sensitivity (1)
2.83 volt @ 1m
Maximum SPL (3)
@ 1m
Impedance
Distortion
0.1 Full Power
50 Hz
100 Hz
0.01 Full Power
50 Hz
100 Hz
Driver Complement
Recommended Crossover Point
Enclosure
Finish
Connectors
Fittings
Dimensions
Weight
NOTES:
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
(1) Average over stated bandwidth. Measured at 1m on axis, in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m in half space conditions.
36Hz - 160Hz
300 - 600 watt / 8 ohm
Average(2) Programme Peak (10ms)
300 watt 600 watt 1200 watt
96 dB
99 dB (half space conditions)
Average Peak
124 dB 130 dB
Nominal 8.0 ohm
Minimum 7.1 ohm
2nd Harmonic 3rd Harmonic
0.22% 0.71%
0.56% 0.31%
2nd Harmonic 3rd Harmonic
0.21% 0.31%
0.25% 0.18%
1 x 15" (381mm) LF Driver
Type number 3813
80Hz - 160Hz, 24dB/octave
Recommended High-pass filter-30Hz, 24dB/octave
100 litre vented, 15mm (5/8") birch plywood
Textured black paint (optional in white)
2 x Speakon NL4MPR IN/OUT
2 x Recessed carrying handles
1 x Blanking plate allows installation of a 35mm pole-mounting
socket
8 x M10 flying inserts.
4 x Rubber feet
665mm(H) x 440mm(W) x 440mm(D)
26 3/16 "(H) x 17 5/16"(W) x 17 5/16"(D)
27 Kg (59.4 lbs)