Specifications - Sharp XL-DK257NH Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source AC 220 - 240 V ~ 50 Hz
Power consumption Power on: 55 W
Power stand-by: 0.6 W (*)
Dimensions Width: 180 mm (7 - 1/16")
Height: 260 mm (10 - 2/8")
Depth: 273 mm (10 - 6/8")
Weight 4.4 kg (9.7 lbs.)
( * )This power consumption value is obtained when the
demonstration mode is cancelled in the power stand-by mode.
Refer to page 8 to cancel the demonstration mode.
Amplifier
Output power PMPO : 320 W
MPO : 160 W (80 W + 80 W) (10% T.H.D.)
RMS: 160 W (80 W + 80 W) (10% T.H.D.)
RMS: 100 W (50 W + 50 W) (1% T.H.D.)
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
150 mV/10 k ohms at 70 Hz
Input terminals Audio In (Audio signal):
250 mV/47 k ohms
CD player
Type Single disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter Multi bit D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Tuner
Frequency range FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Speaker
Type 2-way type speaker system
5 cm (2") tweeter
12 cm (4 - 3/4") woofer
Maximum input 160 W
power
Rated input power 80 W
Impedance 4 ohms
Dimensions Width: 148 mm (5 - 13/16")
Height: 260 mm (10 - 1/4")
Depth: 198.5 mm (7 - 13/16")
Weight 2.45 kg (5.40 lbs.)/each
XL-DK257NH
ENGLISH
E-36