This product is classifi ed as a CLASS 1 LASER PRODUCT Caution - Use of any controls, adjustments or procedures other than those specifi ed herein may result in hazardous radiation exposure. SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga,Ontario L4Z 1W9 Printed in Malaysia...
Sharp, a Sharp authorized service centre or a Sharp authorized servicing dealer. Any defects caused or repairs required as a result of the use of the Product with items not specified or approved by Sharp, including but not limited to, head cleaning tapes and chemical cleaning agents.
10 cm (4”) in electric shock. Refer internal service to your Use the unit on a fi rm, level surface free from local SHARP service facility. vibration. This unit should only be used within the range of Place the speakers at least 30 cm (12”) away from 5˚C - 35˚C (41˚F - 95˚F).
Batteries are not included. may result in a fi re or other type of accident causing damage. SHARP will not be held responsible for any Plastic fi lm covering can be removed or peeled off. damage resulting from use of this unit with a voltage Open the battery cover.
General control Auto power off function The main unit will enter the stand-by mode (when iPod/ iPhone is not docked) after 15 minutes of inactivity during: iPod/iPhone: No connection. AUDIO IN: No detection of input signal or very low sound audibility.
Page 6
Listening to the iPod or iPhone iPhone and iPod operations To insert iPod or iPhone adaptor Made for: iPhone 3GS Open the iPod cover by pulling up the tip. iPhone 3G iPhone iPod touch (3 generation) iPod touch (2 generation) iPod touch (1 generation) iPod classic...
Page 7
Listening to the iPod or iPhone (continued) To disconnect iPod or iPhone Various iPod functions Simply remove the iPod or iPhone from the iPod dock. It is Main Remote Function Operation safe to do so even during playback. unit control Play Press in the pause mode.
Page 8
Listening to a CD or MP3/WMA disc (continued) Various disc functions Repeat play Repeat play can play one track, all tracks or a programmed Main Remote Function Operation sequence continuously. unit control To repeat one track: Play Press in the stop mode. Press the PLAY MODE button repeatedly until “1-REPEAT”...
Page 9
Advanced CD or MP3/WMA disc playback (continued) Notes: Programmed play (CD) When a disc is ejected, the programme is automatically cancelled. You can choose up to 32 selections for playback in the If you press the ON/STAND-BY button to enter the order you like.
Disconnect USB memory device from the USB terminal. Notes: SHARP will not be held liable for the loss of data whilst the USB memory device is connected to the audio system. Files compressed in MP3 and/or WMA format can be played back when connected to the USB terminal.
Advanced USB playback (continued) Listening to the radio (continued) Notes: Manual tuning: This unit only supports “MPEG-1 Audio Layer-3” Press the TUNING ( ) (TUNING format. (Sampling Frequency is 32, 44.1, 48kHz) )) button repeatedly to tune in to the Playback order for MP3 fi...
Listening to the radio (continued) Setting the clock (Remote control only) (continued) To scan the preset stations Note: The stations saved in the memory can be scanned The “CLOCK” will appear or time will be displayed when automatically. (Preset memory scan) the AC power supply is restored after a power failure or unplugging the unit.
Page 13
Timer and sleep operation (Remote control only) (continued) To select the timer playback source (CD, TUNER, USB, Reusing the memorised timer setting: iPod or AUDIO IN), press the button. Press The timer setting will be memorised once it is entered. To the MEMORY button.
Many potential problems can be resolved by the owner Portable without calling a service technician. audio player, If something is wrong with this product, check the following etc. before calling your authorised SHARP dealer or service centre. Audio cable (not supplied) General Symptom...
Page 15
Troubleshooting chart (continued) If problem occurs during operation When this product is subject to strong outdoor interference Symptom Possible cause (mechanical shock, excessive static electricity, abnormal Device cannot be Is there any MP3/WMA fi le supply voltage due to lightning, etc.) or if it is operated detected.
ARTIST and ALBUM only. Supports ID3TAG version 1 Specifi cations and version 2. As part of our policy of continuous improvement, SHARP File system support Support USB devices with Microsoft Windows/DOS/ reserves the right to make design and specifi cation FAT 12/FAT 16/ FAT 32.