Calibration
Calibration
After installation, the TravelPilot DX-N must be calibrated. You
will find the procedure for this described in the operating instruc-
tions.
Calibrating the Gala curve
After the TravelPilot DX-N is calibrated, the values that were
determined must be transferred to the control unit software so
that the Gala feature (sound-dependent volume adjustment)
works correctly.
Please proceed as follows:
1. Turn off TravelPilot DX-N.
2. Press the
button and keep it pressed.
3. Turn on the TravelPilot DX-N and release the
the service menu appears.
4. Using the
button, select the settings menu
the
OK
button. This procedure transfers the calibration val-
ues that were previously determined to the control unit.
5. Close the service menu by pressing the
Allgemeines Kurzanlei-
button when
and press
button.
Zieleingabe
Touren
Zielspeicher Einstellun-
9
Anhang