Procedure To Be Applied In The Event Of A Fault - Siemens HM745516N Instruction Manual

Procedure to be applied in the event of
a fault
Fault
Appliance is not operating.
The clock display is flashing.
Burners are not burning at all Burners are not burning at all
or not burning correctly. or not burning correctly.
There is no ignition from the
burners.
The oven light does not come
on.
46
Faults generally occur for simple reasons. Please note
the following fault warnings before contacting the
after sales service:
Possible reason
The plug is not connected
to the power socket.
The safety fuse in the
safety fuse box has blown.
Main gas valve is closed.
Power cut.
Gas valve is closed.
If the appliance is set to
LPG (liquid gas), the gas
holder is empty.
Burner body, cover and
channels, spark plugs and
injectors are contaminated.
Burner body, cover and
channels are damp.
Burner parts are not set
correctly, covers are fitted
incorrectly.
The plug is not connected
to the power socket.
The safety fuse in the
safety fuse box has blown.
The oven light is faulty.
Information/correcting
Connect the plug to the power socket.
Check the condition of the safety fuse
by looking at the safety fuse box.
Open the gas valve.
Adjust the time again.
Open the gas valve.
Replace the empty gas holder with a full
one.
Clean and dry all burner parts.
Dry all burner parts.
Set all burner parts correctly.
Connect the plug to the power socket.
Check the condition of the safety fuse
by looking at the safety fuse box.
Replace the oven light.