Siemens C55 User Manual page 83

82
Switch off ringer
Switch off the ringer only for the
current call/alarm (not if "Any key an-
swer" p. 60, is active):
*
Hold down.
The call is still displayed. When you
now accept or reject the call or
switch the phone off and on again,
this function is ended.
Switch on/off all sounds
All signal tones (also the ringer) can
be deactivated and activated in
standby mode:
*
Hold down.
A call is still displayed. Silent alert re-
mains active if it has been activated
previously. The audio settings are
not affected. By switching the phone
off and on again, this function is also
ended (see also p. 82).
T9 language versions
If you want to load another diction-
ary (T9 language version) to support
writing SMS in a different language,
a comprehensive selection of dic-
tionaries to be downloaded via the
Internet and the relevant installation
notes can be found at:
www.my-siemens.com/t9
Notes A-Z
Two phone numbers
Special settings can be made for
each phone number (e.g. melody,
call divert etc.). Switch to the re-
quired number first.
To switch the phone number/line in
standby mode:
0
§Line 1§
WAP
(Wireless Application Protocol)
A technical standard that is the basis
of the connection between mobile
radio networks and the Internet.
WAP enables mobile surfing using
the mobile phone in the Internet,
downloading of games and applica-
tions and the use of WAP services
such as news, stock exchanges or
information.
Press.
Press.
L