Phone Identity - Siemens C55 User Manual

62
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
p
Condition set.
o
Not set.
Display, if status is un-
s
known (e.g. on a new
SIM card).
Clear all
All set diversions are cleared.
Note
Note that the divert is stored in the network
and not in the phone (when the SIM card is
changed for example).
Check condition or delete it
First select the condition.
§Select§ Press.
Check status Select
or
Delete Select.
Reactivate divert
The last divert has been stored. Proceed as
with "Set divert". The stored phone number
is displayed. Confirm number.
Edit phone number
Proceed as with "Set divert". When the
stored number is displayed:
§Delete§ Press. The phone number is
deleted.
Enter new number and confirm.
Setup
§Menu§ K
K
Fact. settings
The phone is reset to the default val-
ues (factory setting) (does not apply
to SIM card and network settings).
Alternative input in standby mode:
*
# 9 9 9 9 #
L

Phone identity

The phone ID (IMEI) is displayed. This
information may be useful for cus-
tomer service.
Alternatively enter in standby mode:
*
# 0 6 #
Setup K Device
Select a function.
A