Getting Started; Insert Sim Card/Battery - Siemens MT50 User Manual

Hide thumbs Also See for MT50:

Table of Contents

The service provider supplies you

with a SIM card on which all the im-

portant data for your line is stored.

If the SIM card has been delivered in

credit card size, snap the smaller

segment out and remove any rough

edges.

• Press grooved area

cover

• Press latch in the direction indicat-

ed by the arrow

the cutout on side of the phone,

then tilt upwards and remove

Getting started

, then lift

, lift battery at

• Insert SIM card in the opening

(contacts pointing downwards)

and push gently until it engages

(make sure the angled corner is in

the correct position

• Insert battery into the phone side-

ways

, then press downwards

, until it engages.

• Replace cover and press down-

wards until it engages.

Note

Always switch off phone before removing

the battery!

Only 3-Volt SIM cards are supported.

Please contact your service provider, if you

have an older card.

Functions without SIM card ...............p. 80

Table of Contents

Table of Contents