Battery Care - Siemens MT50 User Manual

62
¢ ¢
§Menu§ Setup
¢
Select a function.
Status
Fact. settings
The phone is reset to the default val-
ues (factory setting) (does not apply
to SIM card and network settings):
W
*
# 9 9 9 9 #
Phone identity
The phone ID (IMEI) is displayed. This
information may be useful for cus-
tomer service.
Fast search
When this function is active, net-
work connection is speeded up
(standby time is reduced).
T9 input
T9 preferred
Activate intelligent text entry or
deactivate it.
Input language
Select language in which the mes-
sage is to be composed.
Languages with T9 support are
marked by the T9
Device
symbol.
Setup
¢
§Menu§
¢

Battery care

(only if a NiMH battery is used)
This function allows the NiMH bat-
tery to be regenerated when the
operating time drops (eliminating
the memory effect).
Connect the phone as for charging
(p. 8) and then call up this function.
The battery is now fully discharged
and recharged. Depending on the
state of the battery, this can take up
to 5 hours.
Note
No phone calls can be made during this
process. The clock setting is retained.
¢
Setup Device
Select a function.