Checking Timing Belt; Replacing Fuse - Yamaha F6A Owner's Manual

EMU00380

CHECKING TIMING BELT

Inspect the timing-belt and replace it if any
to the following signs is observed:
G Cracks in the back of the belt or in the
base of belt teeth.
G Excessive wear at the roots of cogs.
G Rubber portion swollen by oil.
G
Belt surfaces roughened.
G
Signs of wear on edges or outer surface
of belt.
G Stretching by 10 mm (0.39 in) or more
when the belt is pushed with a finger.
CAUTION:
@
Consult your Yamaha dealer for replacing
the timing-belt.
@
EMU01315

REPLACING FUSE

If the fuse has blown on an Electric start
model, open the fuse box and replace the
fuse with a spare one of proper amperage,
using a fuse puller.
WARNING
@
Be sure to use the specified fuse. An incor-
rect fuse or a piece of wire may allow
excessive current flow. This could cause
electrical system damage and a fire hazard.
@
NOTE:
@
If the new fuse blows again immediately,
consult a Yamaha dealer.
@
1 Fuse box
2 Fuse (10 A)
3 Spare fuse (10 A)
4 Fuse puller
4-20
E