EMU01414
Power Tilt Model
WARNING
@
G
Be sure all people are clear of the out-
board motor when adjusting the tilt
angle, also be careful not to pinch any
body parts between the drive unit and
clamp bracket.
G
Use caution when trying a trim posi-
tion for the first time. Increase speed
gradually and watch for any signs of
instability
Improper trim angle can cause loss of
control.
G
Use the power tilt switch located on
the
bottom
equipped) only when the boat is at a
complete stop with the engine off.
@
1) Place the gear-shift lever in the neutral
position.
3-21
or
control
problems.
engine
cowling
E
(if