Step 3: Create Local Users Or Setup Authentication; Step 4: Create Folders And Set Up Acls; Step 5: Start Services - Thecus N0204 miniNAS User Manual

Don't know which RAID level to use? Find out more about the different RAID levels
from Appendix C: RAID Basics.

Step 3: Create Local Users or Setup Authentication

Once the RAID is ready, you can begin to create local users for the N0204 miniNAS,
or choose to setup authentication protocols.
For more on managing users, go to Chapter 4: User and Group Authentication.

Step 4: Create Folders and Set Up ACLs

Once users are introduced into your network, you can begin to create various folders
on the N0204 miniNAS and control user access to each using Folder Access Control
Lists.
For more information on managing folders, see
Chapter 4: Storage Management > Share Folder.
To find out about configuring Folder Access Control Lists, see Chapter 4: Storage
Management > Share Folder> Folder Access Control List (ACL).

Step 5: Start Services

Finally, you can start to setup the different services of the N0204 miniNAS for the
users on your network. You can find out more about each of these services by
clicking below:
SMB/CIFS
Apple File Protocol (AFP)
Network File System (NFS)
File Transfer Protocol (FTP)
iTunes Server
Media Server
Printer Server
Photo Server
20