Handset Programming - Xblue Networks WiOS Setup Manual

WiOS

Handset Programming

To enter the Handset programming mode, press and hold the first soft button (F1) for
3 seconds. The soft keys assist in the programming process. In programming the
soft keys do double duty. When scrolling through the main programming screen,
soft keys (F1) and F2) are used for "Up" and "Down". However, once a parameter
is selected, they are used for "Yes" and "No". The right soft key (F3) is used for
"Select" and "OK".
Left Soft Button (F1)
Center Button (F2)
Soft Buttons Function
Left (F1) Enter/Exit Handset Programming Mode
Scroll up
Yes
F2 (Center) Scroll down
No
F3 (Right) Select
OK
On/Off
- 20 -
Right Soft Button (F3)
Ring Mode
The Handset has three different ring modes. Ring, Vibrate, and Ring and Vibrate.
The Default setting is Ring only.
Select Vibration to set the type of ringing for this handset.
(( ))
> VIBRATION
AUTO PICKUP
When set to "Ring" – the handset will ring when the extension number is dialed.
Press "OK" (F3), the ICON will update.
VIBRATION
√RING VIBRATION
When set to "Vibrator" – the handset will vibrate when the extension number is
dialed. Press "OK" (F3), the ICON will update.
(( ))
VIBRATION
RING √VIBRATOR
When set to "Ring and Vibrator" – the handset will ring and vibrate when the
extension number is dialed. Press "OK" (F3), the ICON will update.
(( ))
VIBRATION
√RING √VIBRATOR
Once the desired language is in the display, press OK (F3). A confirmation tone will
be heard and the word "OK" will appear in the display.
Once the desired Ring mode is selected press the "OK" (F3). A confirmation tone
will be heard and the display will update:
(( ))
VIBRATION
√RING + VIB OK!
WiOS
25 -
-