Stopping Engine - Yamaha DX150A Owner's Manual

Outboard motor dx150a
Table of Contents

Advertisement

ON
START
OFF
EMU00273
Let it cool off for a few minutes at idle or
low speed first. Stopping the engine
immediately after operating at high speed
is not recommended.
EMU00276
1) Turn the main switch to "OFF".
2) If the fuel joints are provided, discon-
nect the fuel line from the motor after
stopping the engine.
3) Tighten the air vent screw on the fuel
tank cap after stopping the engine, if
it is equipped.
4) Remove the key if the boat will be left
unattended.
NOTE:
The engine can also be stopped by
701023
pulling the lanyard and removing the lock
plate from the engine stop lanyard switch
(then turning the main switch to "OFF").
3-17

STOPPING ENGINE

E

Advertisement

Table of Contents
loading

Table of Contents