Operation After A Long Period Of Storage - Yamaha DX150A Owner's Manual

Outboard motor dx150a
Table of Contents

Advertisement

EMU00211
Engine
8 Check the engine and engine mounting.
8 Look for loose or damaged fasteners.
8 Check the propeller for damage.
8 Check that the battery is in good condi-
tion and battery connections are secure.
EMU01174
OPERATION AFTER A LONG PERIOD
OF STORAGE (for Precision blend
system model)
When operating the engine after a long
period (12 months) of storage, proceed as
follows:
1) Use a 50 : 1 gasoline-oil mixture to
start the engine.
2) Start the engine. Leave it idling.
w
8 Do not touch or remove electrical parts
when starting or during operation.
8 Keep hands, hair, and clothes away
from flywheel and other rotating parts
while engine is running.
3) Watch for oil flowing through the oil
feed pipes. After any air in the oil
lines has been expelled, YAMAHA
PRECISION BLEND SYSTEM should
supply oil normally. If no oil has
begun flowing after 10 minutes of
idling, consult your Yamaha dealer.
cC
8 When operating the engine after a long
period of storage, be sure to take the
above steps; otherwise, engine seizure
may occur.
8 After completing the above steps, use
gasoline (petrol) only. If premix fuel is
used continually, the oxygen sensor for
Electronic Fuel Injection system could
be damaged.
3-9
E

Advertisement

Table of Contents
loading

Table of Contents