6. Channel Mode Configuration
ADSL router supports multiple channel operation modes. This section will show
procedures to configure the router.
6.1 Bridge Mode
ADSL modem/router is bridge mode enabled by factory default. There is a
1483-bridged mode PVC 5/35 in system.
1 Open the WEB page at "WAN/Channel Configuration".
2 Select the Channel Mode to "1483 Bridged". Set the parameters VPI/VCI and
Encapsulation mode according to the CO DSLAM's setting.
3 Click "Add" button to add this channel into VC table.
4 Open the WEB page at "Admin/Commit/Reboot". Press "Commit" to save the
settings into flash memory.
5 The new settings will take effect after reboot the system.
CAR-854 Wireless b/g ADSL 2/2+ Modem Router
- 68 -
User Manual