Table of Contents
Advertisement
3. Software Configuration
The DSL device is an ADSL2+ wireless router. When you power on the device, the system will
boot up and connect to ADSL automatically. The default configurations for the system are
listed below.
LAN IP address: 192.168.1.1,
NetMask: 255.255.255.0
Wireless SSID: CAR-970
User can change settings via WEB browser. The following sections describe the set up
procedures. Please set your PC's Ethernet port as follow:
IP address: 192.168.1.XXX
NetMask: 255.255.255.0
Start your web browser. Type the Ethernet IP address of the modem/router on the address
bar of the browser. Default IP address is 192.168.1.1. The Enter Network Password dialog
box appears. Type the user name and password and then click OK.
admin; default password :
the status page.
This page displays the ADSL modem/router's current status and settings.
admin) Once you have connected to ADSL2+ router. You will see
5
(default user name :
CNet Technology Inc.
www.CNet.com.tw
Advertisement
Table of Contents
