Disassembly And Inspection; Recoil Starter - Yamaha BR250F Service Manual

2-2. DISASSEMBLY AND INSPECTION
A. Recoil Starter
Drive Plate Spring
Drive Pawl
Drive Plate
/
/
1. Remove the air shroud and the starter
from the engine.
2. Pull about four inches of starter rope
from the cutout in the sheave drum.
Rotate the sheave drum five times clock- .
wise to release the preload on the starter
spring.
3. Remove the securing nut, and carefully
disassemble the starter. Note the relative
position of each piece. You will have to
reassemble the starter as shown in the
illustration above.
Be careful when removing the drive plate and
the sheave drum. There is a preloaded spring
behind each of these items.
2·2