Chapter 2. Engine; Engine Removal - Yamaha BR250F Service Manual

ENGINE
2-1.
ENGINE REMOVAL
You do not have to remove the engine in
order to service the following components:
Cylinder,
Piston,
Recoil Starter,
Flywheel Magneto, and
Carburetor
To remove the engine, remove or disconnect
the following components in the order given
below.
1. Muffler.
2. Drive guard, V-belt, and primary sheave
(Refer 4-3, A "Removal.")
3. Carburetor (Refer to 3-1, A "Removal.")
4. D-handle from the starter rope. Knot the
rope so it will not be pulled into the
starter case.
5. Spark plug wire.
6. Pulse pipe from the fuel pump.
7. Oil line that feeds the autolube pump.
Disconnect the joint in the middle of the
line. Do not let air enter the line.
8. Four flywheel magneto leads.
9. Hood Iimiter cable.
10. Three engine mounts; remove the engine.
2-1