Yamaha BR250F Service Manual page 62

1. Turn the track by running the engine.
2. Loosen the lock nuts, and turn both the
right and left track adjusting bolts until
the track is aligned with the slide rail as
illustrated.
No good
Slide runner
1. Lock nut
Good
Slide runner
2. Adjusting bolt
No good
Slide runner
Track metal
~
Forward
Gap between slide runner
and edge of track window.
When shifted to right: Tighten the right track adjusting
bolt, and loosen the left track adjusting bolt.
3. Check the track deflection. It should
equal the specified value.
4. If it does not, repeat the above proce-
dures until deflection equals specifica-
tion.
5. Tighten the track adjusting lock nuts.
Torque to specification.
Track metal
~
-lL:
Forward
Gap between slide runner
and edge of track window.
When shifted to left: Tighten the left track adjusting
bolt, and loosen the right track adjusting bolt.
Tightening torque:
3.5 rn-kq (25 ft-lb)