Periodic maintenance
1. Maximum level mark
2. Minimum level mark
Recommended drive chain oil:
SAE 75W or 80W API GL-4 Gear oil
ECS00530
CAUTION:
Make sure that no foreign material enters
the drive chain housing.
5.
Install the dipstick, making sure to align
the notch in the dipstick handle with the
projection on the drive chain housing.
58
1. Notch
2. Projection
6.
Install the right side cover and the shroud.
To adjust the chain tension
1.
Remove the shroud and the right side
cover. (See page 42 for removal proce-
dures.)
2.
Loosen the locknut.
3.
Turn the chain tension adjusting bolt
clockwise until it is finger tight, and then
loosen it 1/4 turn.
4.
Hold the chain tension adjusting bolt in
place while tightening the locknut.
1. Locknut
2. Chain tension adjusting bolt
5.
Install the right side cover and the shroud.
ESU12130
Brake and parking brake
EWS00440
WARNING
A soft, spongy feeling in the brake lever
G
indicates a failure in the brake system.