Cleaning Water Inlet Strainers - Siemens WS09X260HK Operating And Installation Instructions

Cleaning water inlet
strainers
Cleaning the strainer at the
water tap
Cleaning the strainer on the
washing machine
32
This is necessary if very little or no water flows into the
washing machine.
First, reduce the water pressure in the inlet hose:
q Turn off the tap.
q Turn the programme selector to any programme
(except Single spin B ).
q Press the  M " button, and allow the programme
to run for approx. 40 seconds.
q Disconnect the hose from the water tap.
q Rinse the strainer under flowing water.
q Connect the hose.
q Disconnect the hose from the back of the washing
machine.
q Pull out the strainer and rinse under running water.
q Insert the strainer and reconnect the hose.
q Turn on the water tap and check whether water is
still discharged. If water is leaking, check that the
filter is correctly seated.
q Turn off the tap.