Table of Contents
Advertisement
Cleaning water
inlet strainers
Release the water pressure
in the supply hose
Cleaning the strainer at the
water tap
Cleaning the strainer on the
washing machine
This is necessary if very little or no water flows into the
washing machine.
1. Turn off the water tap.
2. Turn the programme selector to any programme
(except Spin B and Pumping).
M
3. Press the
button, and allow the programme to
run for approx. 40 seconds.
4. Turn the programme selector to Off.
1. Disconnect the hose from the water tap.
2. Rinse the strainer under flowing water.
3. Connect the hose.
1. Disconnect the hose from the back of the washing
machine.
2. Pull out the strainer and rinse under running water.
3. Insert the strainer and reconnect the hose.
4. Turn on the water tap and check whether water is
still discharged. If water is still discharged, check
that the strainer is attached properly.
5. Turn off the water tap.
31
Hide quick links:
Advertisement
Table of Contents
