Cleaning Water Inlet Strainers - Siemens HWT-1200X Instruction Manual And Installation Instructions

Cleaning water
inlet strainers
Release the water pressure
in the supply hose
Cleaning the strainer at the
water tap
30
To avoid unused detergent from flowing into the drain
during the next wash cycle:
9. Pour approx.1 litre / 1 ¾ pt of water into
chamber II.
10.Select the DRAIN programme.
This is necessary if very little or no water flows into the
washing machine.
1. Turn off the water tap.
2. Turn the programme selector to any programme
(except SPIN B and DRAIN).
3. Press the START M button, and allow the
programme to run for approx. 40 seconds.
4. Turn the programme selector to OFF.
1. Disconnect the hose from the water tap.
2. Rinse the strainer under flowing water.
3. Connect the hose.