Table of Contents
Advertisement
Cleaning water
inlet strainers
Release the water pressure
in the supply hose
Cleaning the strainer at the
water tap
30
To avoid unused detergent from flowing into the drain
during the next wash cycle:
9. Pour approx.1 litre / 1 ¾ pt of water into
chamber II.
10.Select the Pumping programme.
This is necessary if very little or no water flows into the
washing machine.
1. Turn off the water tap.
2. Turn the programme selector to any programme
(except Spin B and Pumping).
3. Press the Start button, and allow the programme
to run for approx. 40 seconds.
4. Turn the programme selector to Off.
1. Disconnect the hose from the water tap.
2. Rinse the strainer under flowing water.
3. Connect the hose.
Hide quick links:
Advertisement
Table of Contents
